|
|
SECTION I: MATERIAL IDENTIFICATION AND USE
| Material
Name |
MAGIC
BLUE |
| Chemical
Name & Synonym |
pH
Balanced Solution |
| Chemical
Identity |
Multicomponent
Liquid |
| Trade
Name & Synonym |
Magic
Blue |
| Product
Use |
Liquid
cleaner for cleaning applications to replace hydrocarbons like Kerosene
or Diesel. |
| SECTION
- II: HAZARDOUS INGREDIENTS OF MATERIAL |
| HazardousIngredients | Approximate Concentration% |
C.A.S. or UN Number | LD 50 (Specify species and route) | LD 50 (Specify and route) |
| NIL |
NIL |
NA |
NA |
NA |
| SECTION
- III: PHYSICAL DATA FOR MATERIAL |
| Physical
State |
Odour
& Apperance |
Odour
Threshold (ppm) |
Specific
Gravity |
| Liquid |
Pale
Blue |
Data
not available |
1.1-
1.2 |
| Vapour
Pressure (mm Hg) |
Vapour
Density(Alr = 1) |
Evaporation
Rate |
Boiling
Point(Deg. C) |
Freezing
point(Deg. C) |
| Similar to water | Similar to water | ----- | Above 154ºC | Not Pertinent |
| Solubility
inWater (20ºC) |
PH |
Density
(g/ml) |
Coefficient
of water/oil distribution |
| Freely
soluble |
6.8
- 7.2 |
1.1
- 1.2 |
N.
A. |
| SECTION
- IV: FIRE & EXPLOSION HAZARD OF MATERIAL |
| Flammability
If yes under whatcondition |
Not
Flammable; Aqueous solution |
| Extinguishing
media |
Product
is non flammable |
| Special
Procedures |
Not
Pertinent |
| Flash
point (Deg.C DATA and method) |
Upper
explosion limit (% by volume) |
Lower
explosion limit (% by volume) |
| N.A. |
N.A. |
N.A. |
| Auto
Ignition Temperature (Deg. F) |
TDG
Flammability |
Hazardous
combustion products |
| N.A. |
N.A. |
Not
Pertinent |
| Explosion
dataSensivity to chemical impact |
Incompatible
with oxidizing chemicals |
| SECTION
- V: REACTIVITY |
| Chemical StabilityIf no, under what conditions | Stable
under normal conditions |
| Incompatibility to other substances, if yes which one | Strong
oxidizers |
| Reactivity and under what conditions | - |
| Hazardous decomposition products | - |
| SECTION
- VI: TOXICOLOGICAL PROPERTIES OF MATERIAL - NON-TOXIC |
| Route of entry |
| ____x_____ Skin contact ____>_____ Skin Absorption _____>____ Eye contact____>_____ Inhalation acute _________ Inhalation chronic ___>__ Ingesion |
| Effects of acute exposure to material | N. A. |
| Effects of chronic exposure to material | ----- |
| Exposure Limits | ----- |
| Irritancy of material | Skin and eye irritant |
| Sensitisation to materials | Not Sensitive to ferrous alloys |
| Synergistic materials | Water |
| SECTION
- VII: PREVENTIVE MEASURES |
| PERSONAL
PROTECTIVE EQUIPMENT |
| Gloves (Specify)Acid - Alkali resistant | Respiratory (Specify)Normal | Eyes (Specify)Safety goggle |
| Footware (Specify)Acid - Alkali resistant | Clothing (specify)Safety apron | Others (Specify)- |
| Engineering controls (eg. Ventilation, enclosed process etc.) Please specify Normal Ventilation |
| Leak
and spill procedures |
Water
wash, flush drain |
| Waste
disposal |
Local
effluent regulations |
| Handling, storage & equipment | Handling by protective equipment |
| Storage requirements | Ambient temperature |
| Special shipping information | None |
| SECTION
- VIII: FIRST AID MEASURES |
| Eyes | Irrigate thoroughly with plenty of clean water |
| Lungs | Seek medical attention |
| Skin | Wash with water, remove contaminated clothing |
| Mouth | Wash mouth with plenty of water, seek medical attention |
| Additional Information | Harmful if swallowed. Avoid eye and skin contact |
| SECTION
- IX: PREPARATION DATE OF MSDS |
| Prepared
by |
Safety
Department |
Eximious
Ventures Pvt. Ltd. |
|
Authorised Signatory |
|
|
|
|
